Hot melt nut

Hot melt embedding is the most common and common embedding method, usually with hot melt machine and manual electric soldering iron.

·Injection nut

Injection molding embedment generally has strict requirements on the hole diameter of the nut, which is controlled within 0.05mm, because the product is fixed with molding pin and placed in the injection molding mold, and the nut hole diameter is controlled by the size of the pin pin of the injection molding machine.

·Ultrasonic nut

Ultrasonic embedding is a method of raising the temperature transmitted to the interface through the friction between the nut and the workpiece surface and internal molecules through ultrasonic vibration. When the temperature reaches the softening temperature of the workpiece itself, the nut is embedded in the rubber. When the vibration stops, the workpiece is cooled and shaped under certain pressure.

·High frequency welding machine

Using the electromagnetic induction heating principle: J has fast speed, high welding efficiency, high heating temperature, energy saving and environmental protection!

The high-frequency induction welding machine can be used for plastic welding and riveting, screw embedding, and nut implantation in the plastic body. When plastic welding, the high-frequency welding machine is used, and there will be no overflow, welding transmission, deformation and other phenomena. At the same time, the welding is beautiful and reliable, and the yield is high!

Ririxin precision machinery professional riveting fasteners, embedded nuts, mobile phone antenna